Công ty TNHH Cicor Việt Nam logo
Công ty TNHH Cicor Việt NamĐược đăng bởi Jobryva (Quản lý: [email protected])

Hardware Design Engineer

Bình Dương, Thành phố Thuận An (Vietnam)•MID•FULL_TIME
Mức Lương Dự Kiến (Thỏa thuận)
25.000.000 - 45.000.000 ₫/ tháng (Ước tính theo cấp bậc)
24 ứng viên đã nộp1332 lượt xem

Kỹ Năng & Tech Stack Yêu Cầu

Nội Dung Tuyển Dụng & Đãi Ngộ

Tin tổng hợp từ careerviet. Jobryva tiếp nhận hồ sơ và chuyển thông báo cho quản trị viên; không tự nộp hồ sơ sang website nguồn.

Mô Tả Chi Tiết

Design schematics based on technical requirements and support component selection.

Perform PCB layout directly (not just collaborating), including stack‑up definition, routing of power, high‑speed, RF, and sensitive analog signals following best‑practice guidelines.

Perform board bring‑up, hardware debugging, and signal measurement using oscilloscopes, logic analyzers, and power analyzers.

Conduct R&D testing, including functional validation, power tests, stress tests, and EMI pre‑compliance tests.

Prepare technical documentation: schematic, BOM, layout notes, test plan, and validation reports.

Work closely with the firmware team for feature testing and hardware–software integration.

Support prototype build, review DFM/DFT, and coordinate with manufacturing/testing teams.

Participate in design reviews, evaluate risks, and contribute improvement ideas.

Continuously update knowledge of new technologies, design standards, and best practices.

Any other duties as and when required by Head/ Manager/Leader

Graduated from the University, majoring in Electrical Engineering, Electronics, and Electronics Engineering.

Minimum of 3+ years of Schematics & PCB design experience.

Experience with MCUs (STM, NXP, Microchip, etc) and interfaces (SPI, I2C, UART, CAN, etc).

Knowledge of RF (Wi-Fi, BLE, Cellular, GNSS, etc) design and high-speed PCB (DDR, PCIe, HDMI).

Experience in battery management systems (BMS) and power supply design, including LDO, Buck, and Boost converters.

Proficiency in Altium, KiCad, Cadence Allegro, or Mentor Pads.

Experience in detailed electronics design, implementation & testing of complex PCBA designs, design for test/manufacture & quality.

Familiar with DFM/DFT and hardware validation tools (oscilloscope, power analyzer).

Knowledge of international design standards such as IPC (IPC-2221, IPC-7351, IPC-A-600, IPC-A-610) to ensure product quality and reliability.

Ngành nghề: Điện / Điện tử / Điện lạnh / Điện công nghiệp, Sản xuất / Vận hành sản xuất, CNTT - Phần cứng / Mạng

Kinh nghiệm: 3 Năm

Cấp bậc: Nhân viên

Hình thức: Nhân viên chính thức

Địa điểm: Bình Dương

Về Công Ty Tuyển Dụng

Công ty TNHH Cicor Việt Nam logo

Công ty TNHH Cicor Việt Nam

Bình Dương, Thành phố Thuận An

Tra Cứu Lương Thị Trường

Xem bảng phân vị mức lương Median, p25 và p90 cho vị trí MID Hardware Design Engineer tại Vietnam.

Mở Báo Cáo Lương Chi Tiết →